Courses & Calendar
BAR (ASE Alternative) Training Courses These courses are designed to satisfy the professional certification prerequisites when renewing your Smog Check technician license. Note: ASE certification in the areas of A6, A8, and L1 are acceptable in place of these courses. There are three alternative training courses: · A6 - Electrical/Electronic Systems (24 hrs. min.) ·
COURSE DESCRIPTION: After completing this workshop, you will be able to use OEM (Kia) diagnostic thought process to identify the correct sequence of steps to follow when diagnosing, and repairing today’s vehicles. This training workshop is not all inclusive to Kia vehicles but versatile to all makes and models. Throughout this workshop you will be
This is a 32 hr course and most importantly the 1st part of Level 1 Engine and Emission Controls Fundamentals Time: Monday – Wednesday (6PM – 10PM) Date: July 9th - July 18th This course will cover the following; The proper testing procedure of an BAR 97 Emissions Inspection System (EIS) Two-Speed Idle Test (TSI)
This is a 32 hr course and most importantly the 1st part of Level 1 Engine and Emission Controls Fundamentals Time: Monday – Wednesday (6PM – 10PM) Date: July 9th - July 18th This course will cover the following; The proper testing procedure of an BAR 97 Emissions Inspection System (EIS) Two-Speed Idle Test (TSI)
This is a 32 hr course and most importantly the 2nd part of Level 1 Engine and Emission Controls Fundamentals Time: Monday – Wednesday (6PM – 10PM) Date: July 23rd - August 1st This course will cover the following; Identification of Emission Control Devices Missing, Modified, Disconnected and Defective terminology and its proper usage Components
This is a 16 hr course covering the Operation (Freon Flow), Diagnostics (Electrical and Mechanical) and 609 Certification Time: Monday – Wednesday (6PM – 10PM) (Course may run over d0 to audience questions and participation) Date: July 23rd - July 25th This course will cover the following; Air Conditioning Operation and Components Refrigerants Environmental Issues
This is a 32 hr course and most importantly the 2nd part of Level 1 Engine and Emission Controls Fundamentals Time: Monday – Wednesday (6PM – 10PM) Date: July 23rd - August 1st This course will cover the following; Identification of Emission Control Devices Missing, Modified, Disconnected and Defective terminology and its proper usage Components
This is a 32 hr course and most importantly the 3rd part of Level 1 Engine and Emission Controls Fundamentals Time: Monday – Wednesday (6PM – 10PM) Date: August 6 - August 15th This course will cover the following; The proper testing procedure of an On-Board Inspection System (OIS) Visual and functional testing related to
Smog Check Repair Technicians must renew their Smog Repair License every 2 years and this course will satisfy the BAR criteria for 12 hours of continuing education credit. Electrical Diagnostics Course Objective Use a OEM diagnostic thought process when diagnosing, repairing system or component problems. Identify the 5 Step Troubleshooting Process. Use Voltage Drop testing to
This is a 32 hr course and most importantly the 3rd part of Level 1 Engine and Emission Controls Fundamentals Time: Monday – Wednesday (6PM – 10PM) Date: August 6 - August 15th This course will cover the following; The proper testing procedure of an On-Board Inspection System (OIS) Visual and functional testing related to
The Smog Check Procedures Training must be completed by all Inspector candidates. This training provides students the procedural knowledge, skills, and abilities needed to perform Smog Check inspections. Students who complete and pass this training will have met the Bureau's training requirements to qualify to take the Smog Check Inspector state licensing examination. This training
The Smog Check Procedures Training must be completed by all Inspector candidates. This training provides students the procedural knowledge, skills, and abilities needed to perform Smog Check inspections. Students who complete and pass this training will have met the Bureau's training requirements to qualify to take the Smog Check Inspector state licensing examination. This training
The Smog Check Procedures Training must be completed by all Inspector candidates. This training provides students the procedural knowledge, skills, and abilities needed to perform Smog Check inspections. Students who complete and pass this training will have met the Bureau's training requirements to qualify to take the Smog Check Inspector state licensing examination. This training
Smog Check Inspectors are required to complete 4 hours of BAR license update training every two years for license renewal. This training must be done at the www.californiaarc.gov. Smog Check Repair Technicians are required to complete 16 hours of automotive technology update training every two years for license renewal. Training must be completed at a
   CLASS SCHEDULE April 21, 2025 to June 25, 2025 6:00 pm to 10:00 pm Monday, Tuesday & Wednesday  This course is a minimum of 68 hours in length and is designed for Inspector applicants with no automotive experience and covers the following topics: Safety; Engine theory, design, and operation for gasoline and
October 13, 2025 - November 19, 2025 6:00 pm to 10:00 pm Monday, Tuesday & Wednesday BAR (ASE Alternative) Training Courses These courses are designed to satisfy the professional certification prerequisites when renewing your Smog Check technician license. Note: ASE certification in the areas of A6, A8, and L1 are acceptable in place of these
 CLASS SCHEDULE December 1, 2025 to February 11, 2026 6:00 pm to 10:00 pm Monday, Tuesday & Wednesday This course is a minimum of 96 hours in length and is designed for Inspector applicants with no automotive experience and covers the following topics: Safety; Engine theory, design, and operation for gasoline and diesel engines; Colling
December 1, 2025 - December 17, 2025 6:00 pm to 10:00 pm Monday, Tuesday & Wednesday The Smog Check Inspector Level 2 Training is intended to provide students the knowledge, skills, and abilities needed to perform Smog Check inspections. Students who successfully complete this training will have met the Bureau’s training requirements to qualify to
   CLASS SCHEDULE January 5, 2026 to March 4, 2026 6:00 pm to 10:00 pm Monday, Tuesday & Wednesday This course is a minimum of 68 hours in length and is designed for Inspector applicants with no automotive experience and covers the following topics: Safety; Engine theory, design, and operation for gasoline and diesel
 CLASS SCHEDULE January 19, 2026 to March 18, 2026 6:00 pm to 10:00 pm Monday, Tuesday & Wednesday This course is a minimum of 96 hours in length and is designed for Inspector applicants with no automotive experience and covers the following topics: Safety; Engine theory, design, and operation for gasoline and diesel engines; Colling
February 16, 2026 - March 4, 2026 6:00 pm to 10:00 pm Monday, Tuesday & Wednesday The Smog Check Inspector Level 2 Training is intended to provide students the knowledge, skills, and abilities needed to perform Smog Check inspections. Students who successfully complete this training will have met the Bureau’s training requirements to qualify to
April 20, 2026 - May 5, 2026 6:00 pm to 10:00 pm Monday, Tuesday & Wednesday The Smog Check Inspector Level 2 Training is intended to provide students the knowledge, skills, and abilities needed to perform Smog Check inspections. Students who successfully complete this training will have met the Bureau’s training requirements to qualify to
 CLASS SCHEDULE May 11, 2026 to July 8, 2026 6:00 pm to 10:00 pm Monday, Tuesday & Wednesday This course is a minimum of 96 hours in length and is designed for Inspector applicants with no automotive experience and covers the following topics: Safety; Engine theory, design, and operation for gasoline and diesel engines; Colling
CLASS SCHEDULED May 18, 2026 - May 20, 2026 6:00 pm to 10:00 pm Monday, Tuesday & Wednesday Smog Check Repair Technicians must renew their Smog Repair License every 2 years. Smog Check repair technicians are required to complete 12 hours of update training every two years as part of the license renewal process. This
   CLASS SCHEDULE May 25, 2026 to July 22, 2026 6:00 pm to 10:00 pm Monday, Tuesday & Wednesday This course is a minimum of 96 hours in length and is designed for Inspector applicants with no automotive experience and covers the following topics: Safety; Engine theory, design, and operation for gasoline and diesel
   CLASS SCHEDULE June 8, 2026 to August 5, 2026 6:00 pm to 10:00 pm Monday, Tuesday & Wednesday This course is a minimum of 96 hours in length
CLASS SCHEDULED June 16, 2026 - June 18, 2026 6:00 pm to 10:00 pm Monday, Tuesday & Wednesday Smog Check Repair Technicians must renew their Smog Repair License every 2 years. Smog Check repair technicians are required to complete 12 hours of update training every two years as part of the license renewal process. This
June 22, 2026 - July 8, 2026 6:00 pm to 10:00 pm Monday, Tuesday & Wednesday The Smog Check Inspector Level 2 Training is intended to provide students the knowledge, skills, and abilities needed to perform Smog Check inspections. Students who successfully complete this training will have met the Bureau’s training requirements to qualify to
CLASS SCHEDULE July 27, 2026 - July 29, 2026 6:00 pm to 10:00 pm Monday, Tuesday & Wednesday Smog Check Repair Technicians must renew their Smog Repair License every 2